MACO HS Lift & Slide Door Handles - Internal & External
MACO HS lift-and-slide door handles
Replace the internal or external handle on a compatible MACO HS lift-and-slide patio door. Choose the handle side and finish from the options above. The long lever operates the matching lift-and-slide drive gear.
Price is for one handle. This is not a pair or a complete handle set. The matching handle or finger pull, cylinder, spindle and screw pack are supplied separately.
Choose the correct version
- Internal: inside handle with 10mm locating lugs.
- External: outside handle without locating lugs or exposed fixing screws. The inside screws secure into the external handle.
- Finishes: traffic white RAL 9016 silk gloss, silver F1 anodised, or jet black RAL 9005 matt.
Measurements
| Fixing centres | 80mm |
|---|---|
| Backplate length × width | 160 × 34mm |
| Handle projection | 79mm, as shown in the manufacturer drawing |
| Lever dimension | 242mm, as shown in the manufacturer drawing |
| Rosette depth | 12.3mm |
| Square spindle size | 10mm; spindle not included |
| Cylinder opening | Euro-profile cut-out; cylinder not included |
MACO part numbers
| Finish | Internal | External |
|---|---|---|
| White | 218405 | 218418 |
| Silver | 218403 | 218416 |
| Jet black | 226239 | 227609 |
Before ordering
Check the existing MACO part number, 80mm fixing centres, spindle size, cylinder cut-out and rear fixing arrangement. Internal and external versions are different fittings. These handles are for compatible lift-and-slide hardware, not a universal replacement for ordinary lever door handles. Refer to the technical image and compare it with your existing handle.
Use the correct separately supplied spindle and screw pack for your door thickness and handle combination. Photos show the finish and form of the selected handle; the technical drawing includes a separate cover view and is not a drilling template.
