INDUSTRIAL SUPERGLUE HV

INDUSTRIAL SUPERGLUE HV is a high viscosity setting industrial adhesive based on advanced cyanoacrylate technology.

Benefits:

Fast setting formulation, bonds to most porous and non-porous surfaces in seconds.
Fills gaps up to 0.25mm.
Single component adhesive.
100% solvent free.
Economical in use.

Limitations:

Ensure surfaces are degreased prior to bonding.
Ensure surfaces are close fitting.
This adhesive will not bridge gaps.
Do not use in applications involving constant water immersion.
Do not use on bitumen or tar leaching products.
If in doubt, contact KORE technical services for advice.

Application:

The surfaces to be glued should be clean, dry, and free from dust, grease, and other contaminants. Materials should be stored in a warm environment prior to bonding to avoid chilling of the glue line, which leads to extended setting times. Where possible, ensure the working environment has a relative humidity of 50% or more.

Apply adhesive to one surface only. Press surfaces together and hold for 10 seconds or as indicated below. Cure speed is rapid, so exercise care when aligning.

Specific Data:

Form Clear liquid.

Viscosity 120-180 poise

Base Ethyl Cyanoacrylate

Solids 100% Active

Specific Gravity 1.1 g/cm3

Shear Strength >20Nmm2 (steel-steel ASTM D1002)

Refractive index 1.45 (cured adhesive)

Softening Point 160OC

Working temps. -60 to +80oC

Setting times 15 - 40 seconds (plastic to plastic)

Health & Safety:

Contact Mease Valley for MSDS for a full list of hazards.

Storage:

Store in cool, dry conditions between +5°C and +25°C. Ensure good ventilation. Storage outside these parameters will dramatically reduce shelf life.

Shelf Life:

12 months from the date of manufacture when stored as directed.

Adhesives & Glue

Filters

Xpert Industrial Grade HV High Viscosity Super Glue Superglue Adhesive 20g

Country

Country